High quality Metal CA6161 CA6261 Horizontal Gap Bed Lathe Machine

• Customization: Available
• Type: Horizontal Lathe
• Processing Accessory: Chuck CNC Lathe
• Model NO.: CA6161 CA6261
• Guide Rail: Horizontal Guide Rail
• Tool Holder: Single-tool Holder CNC Lathe
• Power Source: Mechanical Drive
• Controlling Mode: Artificial
• Automatic Grade: Automatic
• Setting Mode: Floor-type
• Precision: High Precision
• Certification: GS, CE, RoHS, ISO 9001
• Condition: New
• Name: High quality Metal CA6161 CA6261 Horizontal Gap Be
• Max.swing over bed: 610mm
• Max. Swing over carriage: 370mm
• Max. swing in gap: 830mm
• Effective gap length: 210mm
• Max. length of work piece: 750 1000 1500 2000 2200 3000 4000mm
• Width of bed: 400mm
• Section of turning tool: 25X25mm
• Spindle speeds: 10-1400rpm/16-1400rpm
• Hole through spindle: 52mm.
• Spindle taper: MT6
• Transport Package: Plywood Case
• Specification: 2550x1140x1750mm
• Trademark: Luzhong
• Origin: China
• HS Code: 8458190000
• Production Capacity: 250

Product Description

 High quality Metal CA6161 CA6261 Horizontal Gap Bed Lathe Machine 

 

Product Description

The main performance characteristics:

1 Machine tool bed box, headstock and tailstock, pallet etc. the binding surface between the manual scraping machine, after rigorous testing, the precision and stability of the effective guarantee machine.
2 The machine adopts high strength cast iron, copper and chromium added special materials, bed width 400mm, bed rail quenching depth 4mm, effectively improve the wear resistance and stability of machine tool.
3 Machine tool bed box lubricated system by the use of the lubrication of the pump for lubrication, for the hot weather, to ensure the cleanliness of the bed box and heat dissipation characteristics, effectively extend the bearing and gear life.
4 Machine tool spindle using Wafangdian bearing, spindle hole diameter 52mm, the precision grinding machine tool gear, effectively improve the hardness, reduce machine noise.
5 Machine tool uses the domestic brand screw, wire mother uses the high quality bronze alloy to guarantee the wear resistance and the accuracy retention.
6 Machine tool with four position high strength tool, shank size: 25x25mm.
 
Application:
1 CA series of ordinary horizontal lathe is suitable for turning inside and outside cylindrical surface, conical surface and other rotating surface, turning various metric and inch, modulus and pitch thread, and can carry out the work of drilling and pulling oil groove, is a very versatile horizontal lathe, widely used in all kinds of shaft and disc parts of the batch processing.
2 This series of lathe bed width in general lathe, rail width 400mm has a high stiffness; guide rail surface is quenched by medium frequency, and is durable.
3 The machine operation is flexible and concentrated, the apron with fast moving mechanism. Using single handle vivid of the operation, pleasant and good..
4 Machine tool structure rigidity and transmission rigidity are higher than the general lathe, the power utilization ratio is high, is suitable for the strong cutting.
5 Machine tool factory in strict accordance with the test procedures for testing, and make a strong cutting test, to ensure that the machine has a good accuracy and reliability. 

Product Parameters

Product main technical specifications:

Specifications		CA6161 CA6161B CA6161C	CA6261 CA6261B CA6261C
Max. Swing over bed		610mm
Max. Swing over carriage		370mm
Max. swing in gap		--	830mm
Effective gap length		--	210mm
Max. length of work piece		750mm/1000mm/1500mm/2000mm/2200mm/3000mm/4000mm
Width of bed		400mm
Section of turning tool		25x25mm
Spindle	Spindle speeds	10-1400rpm/16-1400rpm(24steps)
	Hole through spindle	52mm. (80mm). [105mm]
	Spindle taper	NO.6(MT6)(Φ90 1:20)[Φ113 1:20]
Feed	Number of feeds	64 kinds(for each)
	Range of metric threads(kinds)	(1-192mm)44 kinds
	Range of inch threads(kinds)	(2-24tpi)21 kinds
	Range of module threads(kinds)	0.25-48 (Moduie39kinds)
	Range of  pitch threads(kinds)	1-96DP(37kinds)
Tailstock	Max. tail stock spindle travel	150mm
	Tail stock spindle diameter	75mm
	Taper of tail stock spindle center hole	NO.5(MT5)
Main motor		7.5KW(10HP)
Packing dimensions (L*W*Hmm)	Overall dimensions for750mm	2550x1140x1750
	Overall dimensions for1000mm	2700x1140x1750
	Overall dimensions for1500mm	3200x1140x1750
	Overall dimensions for2000mm	3700x1140x1750
	Overall dimensions for2200mm	4030x1140x1750
	Overall dimensions for3000mm	4850x1140x1750
	Overall dimensions for4000mm	5800x1140x1750
Weight (kg)	Length	G.W  N.W.
	Weight for 750mm	2300  2180
	Weight for 1000mm	2380  2250
	Weight for 1500mm	2577  2437
	Weight for 2000mm	2940  2787
	Weight for 2200mm	3120  2970
	Weight for 3000mm	3600  3450
	Weight for 4000mm	3950  3800

 

Detailed Photos

Company Information

FAQ

1:How can I choose the most suitable machines ?

A: Please tell me your specifications ,we can choose the best model for you , or you can choose the exact model .
You can also send us the products drawing ,we will choose the most suitable machines for you .
 
2: What's your main products of your company?
A: We specialized in all kinds of machines ,such as CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe Machines ,Drilling Machine ,Radial Drilling Machine ,Sawing Machine ,Shaper machine and so on .
 
3: Where is our factory located? How can I visit there?
A : Our factory is located in Tengzhou City ,Shandong Province,277500 China. You are warmly welcomed to visit us.
 
4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.
 
5: What's the Payment Terms ?
A : T/T ,30% initial payment when order ,70% balance payment before shipment ;
Irrevocable LC at sight .
 
5: What's the MOQ?
A: 1 set .(Only some low cost machines will be more than 1 set )